Data Acquisition USB-2405
The ADLINK USB-2405 is a 24-bit high-performance dynamic signal acquisition USB module equipped with 4 analog input channels providing simultaneous-sampling at up to 128 kS/s per channel. The USB-2405 also features software selectable AC or DC coupling input configuration and built-in high precision 2 mA excitation current to measure integrated electronic piezoelectric (IEPE) sensors such as accelerometers and microphones.
The USB-2405 delivers high precision, DC and dynamic measurement performance with very low temperature drift. The onboard 24-bit Sigma-Delta ADC supports anti-aliasing filtering, suppressing modulator and signal out-of-band noise and providing usable signal bandwidth of the Nyquist rate, making it ideal for high dynamic range signal measurement in vibration and acoustic applications.
The USB-2405 supports digital and analog trigger sources and flexible trigger modes, including post, delay, middle, gated, and pre-triggering for efficient data acquisition with no need for post-processing. The USB-2405 is USB bus powered and equipped with BNC connectors and removable spring terminals for easy device connectivity.
- Hi-Speed USB 2.0, and USB bus powered
- 24-bit Sigma-Delta ADC with built-in anti-aliasing filter
- 4-CH simultaneous sampling analog input, up to 128kS/s
- AC or DC input coupling, software selectable
- Analog and Digital triggering & Full auto-calibration
- Supports 2mA excitation output on each analog input channel for IEPE sensor measurement
- Supporting Time-Frequency analysis software -Visual Signal
- Supported Operating System: Windows 7/8 x64/x86, Linux, and MAC (Call for availability)
Include: USB-2405, 4-pin removable spring terminal, 2 m USB Type A to USB Mini-B cable with lockable connector, Module stand, Rail-mount kit
Specifications
| Model name | USB-2405/2AI | USB-2405/S |
| Analog Input | ||
| Channels | 2 | 4 |
| ADC Resolution | 24bit | |
| ADC type | Delta-sigma | |
| Sampling rate | 1 kS/s to 128 kS/s | |
| Input range | ±10V | |
| FIFO buffer size | 8kS across all channel | |
| Input Configuration | Differential or pseudo-differential | |
| Input impedance | 200 kΩ (between positive input and negative input) 16.93 kΩ (Between negative input and chassis ground) | |
| Input coupling | AC or DC, software selectable | |
| Integrated Electronic Piezoelectric (IEPE |
Current: 2 mA or 0 mA, software selectable IEPE compliance: 24V | |
| Over-voltage protection |
±60V | |
| Input common mode range |
±10V | |
| Trigger source | Analog or digital, software selectable | |
| Trigger mode | Post trigger, delay trigger, middle trigger, gated trigger, pre-trigger, post or delay trigger with re-triggering | |
| Data Transfer | Programmed I/O, continuous (bulk transfer mode | |
| Digital Input / Output | ||
| Channels | 2 programmable function I/O | |
| Compatibility | 3.3V / TTL (single-ended) | |
| Initial status | Input (pull low) | |
| Input voltage | Logic low: VIL = 0.8 V max; IIL = 0.2 mA max. Logic high: VIH = 2.0 V min.; IIH = 0.2 mA max. |
|
| Output voltage | Logic low: VOL = 0.8 V max; IIL = 0.2 mA max. Logic high: VOH = 2.0 V min.; IIH = 24 mA max. |
|
| Over-voltage protection |
-2V ~ +7V | |
| Supporting modes | • Static digital input/output • Pulse output, max. frequency:4 MHz • Event counter, max. frequency: 4MHz • Digital trigger IN • Synchronization sample clock IN |
|
| Data Transfer | Programmed I/O | |
| General Specifications | ||
| I/O connector | Two or four BNC connectors and 4-pin removable spring terminals | |
| Operating temperature | 0 to 55°C (32 to 131˚F) | |
| Storage temperature | -20 to 70°C (-4 to 158˚F) | |
| Power requirements | 5V @ 400mA (USB bus powered) | |
| Dimensions (not including stand) | 114 mm (W) x 167.5 mm (D) x 41.3 mm (H) (4.5” x 6.6” x 1.63”) | |
| Relative humidity | 5% to 95%, non-condensing | |
Related Products
ADLINK’s MCM-204 ultra-compact edge DAQ based on ARM Cortex-A9 processors and featuring built-in, four-channel, 24-bit, high-resolution analog input
The USB-7230/7250 USB-based digital I/O modules feature high voltage on/off control and monitoring, and isolation voltage supported up to 2500VRMS.
MCM-100 series ultra-compact machine condition monitoring edge platform, based on Intel Atom® x7-E3950 processors and built-in two or four-channel, 24-bit high-resolution analog input
The USB-2401 is a 24-bit, 4-channel simultaneous-sampling universal input USB DAQ modules featuring built-in signal conditioning circuitry, providing direct measurement of commonly used sensors