Datum Universal Interface
Datum Electronics specifically designed the DUI to accept serial data from the torque transducer, display the torque, RPM and power and provide a wide range of additional analogue and digital outputs. The DUI interfaces with all the Datum rotary, static, reaction, digital torque sensors, and torque transducers, as well as shaft power measurement solutions.
With a built-in display, the module supplies the torque transducer with power, allowing the user to view data in real time. The Interface can also be easily configured to provide additional analogue and digital outputs, such as 4-20mA, +/-5Vdc, 0-5Vdc, +/-10Vdc, 0-10Vdc, as well as RS232/485 serial data.
On top of that, the Datum torque display has a USB port for logging data, allowing data to be saved on a standard memory stick into a simple text file, for analysis at a later date.
The enhanced features of this software include:
- Calibrated Display of Torque in Nm or lb/ft
- Display of Speed (rpm)
- Display of Power in kW or HP
- Peak Torque, Speed and Power Capture Facility
- Data logging of Torque (or Torque, Speed and Power)
Specifications
| SIGNAL INTERFACE OUTPUTS | |||
| Digital: | |||
| RS485 | Serial data | ||
| RS232 | Serial data | ||
| Ethernet | Data | ||
| MODBUS UDP | Serial data | ||
| USB Type Mini B | Serial data and configuration | ||
| USB Type A | Data logging | ||
| Analogues: | |||
| All four of the M425 Transducer’s analogue output channels can be configured for any of the following settings by the user: 4-20mA configured 4-20mA (4-12-20mA): +/-10Vdc, +/-5Vdc, 0-10Vdc or 0-5Vdc | |||
| Channel 1 – Torque | from 0-500Nm as 4-20mA | ||
| Channel 2 – Speed RPM | from 0-100-rpm as 0-5Vdc | ||
| Channel 3 – Power | from 0-5000W as 4-20mA | ||
| Channel 4 – Spare | |||
| Display: | |||
| Torque | Speed RPM | Power | Status |
| ENVIRONMENT | |||
| Normal Specification Range | 10 to 60˚C | ||
| Operating Range | -10 to +70˚C | ||
| Storage Range | -35 to +75˚C | ||
| Environmental Protection | IP54 | ||
| Electromagnetic Compatibility | EN61326-1:2006 (IEC61000-4), IEC60945) | ||
Q&A
Related Products
Datum Electronics Series 420 PTO (Power Take Off) Shaft Torque and Power Monitoring System will monitor and log the torque, shaft speed and transmitted power...
The Datum Electronics Series RS425 non-contact rotary torque transducers have been designed to fit easily in line with any drivetrain or test bed using either...
The Torque Transducer can either be supplied from our standard range with DIN flanges up to 30KNm or as custom units up to any size...
The latest technology Datum Electronics M425 non-contact rotary Torque Transducers have been designed to fit with most applications and solutions requiring rotary torque measurement.