The ADLINK USB-7230/7250 USB-based digital I/O modules feature high voltage on/off control and monitoring, and isolation voltage supported up to 2500VRMS. The USB-7230 provides 32-CH isolated digital I/O and 2-CH frequency/event counters. The USB-7250 provides 8-CH relay output (4 form C and 4 form A), 8-CH isolated DI, and 2-CH frequency/event counters.
The USB-powered USB-7230/7250 features removable screw-down terminals for easy device connectivity, and the included multi-functional stand fully supports desktop, rail, or wall mounting.
The USB-7230/7250 is suitable for industrial I/O control applications requiring high voltage and superior protection. High isolation voltage protects against damage from accidental contact with external voltages and eliminates troublesome ground loops. U-Test, a free ready-to-use testing program, is included to enable operation or testing of all ADLINK USB DAQ series functions with no programming requirement.
- USB 2.0, USB bus powered
- Programmable digital filter removes unexpected glitches from input channels
- Programmable DO/Relay initial status
- 32-CH isolated digital I/O (USB-7230), 8-CH relay output, 8-CH isolated DI (USB-7250)
- 2-CH frequency/event counters (USB-7230/7250)
- Up to 2500 VRMS isolation voltage
- Ready-to-use testing application (U-Test) provided
- Supported Operating System: Windows 7/10, Linux
Include: USB-7230/7250, one pair of 20-pin removable screw, 2 M USB Type A to USB Mini-B, Module stand, Rail-mount kit
Specifications
Model Name | USB-7230 | USB-7250 | |
Relay output | |||
Channels | – | 8 (non-latching, 4-CH form C & 4-CH form A) | |
Max. switching power | – | 60 W, 125 VA | |
Max. switching voltage | – | 220 VDC, 250 VAC | |
Max. switching current | – | 2A | |
Max. carrying current | – | 2A | |
Max. contact rating | – | 30 VDC, 2 A (Resistive)
110 VDC, 0.3 A (Resistive) 125 VAC, 0.5 A (Resistive) |
|
Relay on/off time | – | Operating time | 2ms |
– | Release time | 1ms | |
Resistance | – | 75mΩ | |
Expected life | – | 50 VDC 0.1A (resistive), 1×106 | |
Breakdown voltage | – | 1500 V surge | |
Optical Isolated Input | |||
Channels | 16 | 8 | |
Polarity | Bi-directional (non-polarity) | ||
Logic level | VIH=5 to 24V, VIL=0 to 0.1.5V or dry contact | ||
Input resistance | 2.4k @ 0.5W | ||
Isolated voltage | 2500VRMS (channel to system) | ||
Min. pulse-width for change of state (COS) detection |
20.83ns (software programmable) | ||
Optical Isolated Frequency/Event Counter |
|||
Channels | 2 | ||
Logic level | VIH=5 to 12V, VIL=0 to 0.1.5V | ||
Event counter width | 32-Bit | ||
Max. input frequency (DC coupled) |
1 MHz | ||
Min. input frequency (DC coupled) |
0.1 Hz | ||
Max. frequency error | 0.5% (f ≦ 50kHz)
1% (50kHz < f ≦ 500kHz) 2% (500kHz < f ≦ 1MHz) |
||
Optical Isolated Output | |||
Channels | 16 | – | |
Output type | Open drain MOSFET | – | |
Supply voltage | 5-35VDC | – | |
Max. sink current | 250 mA @ 100% duty (per channel) | – | |
General Specifications | |||
Interface | High speed USB 2.0 compatible, mini-USB connector | ||
Data transfer | Programmed I/O | ||
Dimensions | 156.5 (L) x 114 (W) x 41.3 (H) mm (6.16” x 4.49” x 1.63”) | ||
I/O Connector | Two 20-pin removable screw-down terminals | ||
Power requirement | USB power (5 V @ 400 mA) |
Related Products
The USB-2401 is a 24-bit, 4-channel simultaneous-sampling universal input USB DAQ modules featuring built-in signal conditioning circuitry, providing direct measurement of commonly used sensors
The ADLINK USB-1900 series provides a range of USB 2.0-based multi-functional DAQ modules. The USB-1901 and USB-1902 16-bit 250 kS/s USB 2.0-based high-performance DAQ modules...
The USB-1210 is a 16-bit high-speed USB 2.0-based DAQ module equipped with 4 analog input channels providing simultaneous sampling at up to 2MS/s per channel.
The USB-2405 is a 24-bit high-performance dynamic signal acquisition USB module equipped with 4 analog input channels providing simultaneous-sampling at up to 128 kS/s per...