DAQ/DAQe-2010/2005/2006
- Supports a 32-Bit 3.3 V or 5 V PCI bus (DAQ-2000 series)
- x1 lane PCI Express® Interface (DAQe-2000 series)
- 4-CH differential analog inputs
- Bipolar or unipolar analog input ranges
- Programmable gains of x1, x2, x4, x8
- Scatter-gather DMA for both analog inputs and outputs
- 2-CH 12-Bit multiplying analog outputs with waveform generation
- 24-CH TTL digital input/output
- 2-CH 16-Bit general-purpose timer/counter
- Analog and digital triggering
- Fully auto calibration
- Multiple cards synchronization through SSI (System Synchronization Interface) bus or PXI trigger bus
Specifications
| Model | DAQ/DAQe-2010 | DAQ/DAQe-2005 | DAQ/DAQe-2006 |
| Analog Input | |||
| Resolution | 14 bit | 16 bit | |
| Number of channels | 4 simultaneous-sampling channels with differential input | ||
| Maximum sampling rate | 2 MS/s | 500 kS/s | 250 kS/s |
| Programmable gain | 1, 2, 4, 8 | ||
| Bipolar input ranges | ±10 V, ±5 V, ±2.5 V, ±1.25 V | ||
| Unipolar input ranges | 0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V | ||
| Input Coupling | DC | ||
| Overvoltage protection | Power on: Continuous ±35 V, Power off: Continuous ±15 V | ||
| Input Impedance | 1 GΩ/100 pF | ||
| Trigger sources | Software, external digital/analog trigger, SSI bus | ||
| Trigger modes | Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger | ||
| FIFO buffer size | 8 k samples | 512 samples | 512 samples |
| Data Transfers | Polling, scatter-gather DMA | ||
| Analog Output | |||
| Number of channels | 2 voltage outputs | ||
| Resolution | 12bit | ||
| Output ranges | 0-10 V, ±10 V, 0-AOEXTREF, ±AOEXTREF | ||
| Maximum update rate | 1 μs | ||
| Driving capacity | 5 mA | ||
| Trigger sources | Software, external digital/analog trigger, SSI bus | ||
| Trigger modes | Post-trigger, delay-trigger, and repeated trigger | ||
| FIFO buffer size | 2 k samples | ||
| Data transfers | Programmed I/O, scatter-gather DMA | ||
| Digital I/O | |||
| Number of channels | 8255 24-Bit programmable input/output | ||
| Compatibility | 5 V/TTL | ||
| Data transfers | Programmed I/O | ||
| Timer/Counter | |||
| Number of channels | 2 | ||
| Resolution | 16bit | ||
| Compatibility | 5V/TTL | ||
| Base clock available | 40 MHz , external clock up to 10 MHz | ||
| General Specifications | |||
| Auto Calibration | Yes (+5 V, ±2 ppm/˚C) | ||
| Dimensions | 175 mm x 107 mm (not including connectors) (DAQ-2000 series)
168 mm x 107 mm (not including connectors) (DAQe-2000 series) |
||
| Connector | 68-pin VHDCI-type female | ||
| Operating temperature | 0˚C to 55˚C (32˚F to 131˚F ) | ||
| Storage temperature | -20˚C to 70˚C (-4˚F to 158˚F) | ||
| Humidity | 5 to 95%, non-condensing | ||
| Power requirements | +5 V 1.82 A typical (DAQ-2010)
+3.3 V 1.246 A, +12 V 0.448 A typical (DAQe-2010) |
+5 V 2.04 A typical (DAQ-2005)
+3.3 V 1.03 A, +12 V 0.75 A typical (DAQe-2005) |
+5 V 1.82 A typical (DAQ-2006)
+3.3 V 1.02 A, +12 V 0.67 A typical (DAQe-2006) |