ADLINK, PXI, PXI-9816, PXI-9848, Digitizers, Oscilloscopes

PXI-9816/9846

Brand: ADLINK
Product code: PXI-9816, PXI-9846

    • PXI specifications Rev.2.2 compliant (PXI-98×6)
    • 4 channels of simultaneous single-ended analog input
    • 16-bit high resolution A/D converter
    • Up to 10 MS/s, 20 MS/s, and 40 MS/s per channel
    • 512 MB on-board memory for data storage
    • Software selectable 50 Ω or 1 MΩ input impedance
    • Programmable input voltage range: ±0.2 V / ±1 V or ±1 V / ±5 V
    • 5.1 MHz, 9.6 MHz, and 20 MHz analog input bandwidth for the PCI/PXI-9816, PCI/PXI-9826 and PCI/PXI-9846, respectively
    • Multiple module synchronization via the PXI trigger bus or SSI (System Synchronization Interface)
    • Supports scatter-gather DMA transfer
    • 89 dBc SFDR, 79 dBc SINAD and 12.9-bit ENOB (PXI-9816)
    • Fully auto-calibration

    Specifications

    Analog Input

    Number of channels: 4 single-ended channels

    Input impedance: 50 Ω or 1 MΩ, software selectable

    Input coupling: DC

    Input range: (±0.2 V, ±1 V ) or (±1 V, ±5 V), depends on model type

    ADC resolution: 16 bits, 1 in 65536

    Timebase

    Sample clock sources

    • Internal: on-board oscillator
    • External: CLK IN (front panel SMB connector), PXI Trigger Bus[0..7], PXI 10 MHz, PXI Star, SSI Bus

    Timebase frequency range

    • PCI/PXI-9816: 1 MHz – 10 MHz
    • PCI/PXI-9846: 1 MHz – 40 MHz

    Dedicated External Clock Input From Panel

    Connector type: SMB

    Clock type: sine wave or square wave

    Input impedance: 50 Ω

    Input coupling: AC

    Input range: 1 Vpp to 2 Vpp

    Overvoltage protection: 2.5 Vpp

    Triggering

    Trigger sources:

    • software
    • TRG IO (front panel SMB connector)
    • Analog trigger from CH0 – CH3
    • PXI Star (PXI version)
    • PXI Trigger Bus[0..7] (PXI version)
    • SSI (PCI version)

    Trigger modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger

    Data Storage and Transfer

    On-board memory: 512 MB, shared among the four AI channels

    Data transfer: scatter-gather DMA

    General Specifications

    I/O Connector

    • BNC X4 for analog inputs
    • SMB X2 for external digital trigger and external timebase input

    Dimensions (not including connectors): PXI-98×6: 160 mm (W) x 100 mm (H) (6.24″ x 3.9″)

    Ambient temperature (Operational): 0°C to 55°C (32˚F to 131˚F) (PXI version)

    Ambient temperature (Storage): -20˚C to 80˚C (-4˚F to 176˚F)

    Relative humidity: 10% to 90% non-condensing

    Power Requirement, typical:

    Power Rails PXI/PCI-9816 PXI/PCI-9846
    3.3 V 0.8 A 0.8 A
    5 V 1.4 A 2.0 A
    12 V 0.3 A 0.3 A

     

    Datasheet