ADLINK, PXI, PXI-2204, PXI-2205, PXI-2206

PXI-2204/2205/2206

Brand: ADLINK - Taiwan
Product code: PXI-2204, PXI-2205, PXI-2206

    • PXI specification Rev 2.2 compliant (PXI-2200 series)
    • 64-CH single-ended or 32-CH differential analog inputs
    • Onboard 1 k-sample A/D FIFO
    • Bipolar or unipolar analog input ranges
    • Programmable gains:
      • x1, x2, x4, x5, x8, x10, x20, x40, x50, x200 (PXI-2204)
      • x1, x2, x4, x8 (PXI-2205/2206)
    • 512-configuration channel gain queue
    • Scatter-gather DMA for both analog inputs and outputs
    • 2-CH 12-Bit multiplying analog outputs with waveform generation
    • Onboard 1 k-sample D/A FIFO
    • 24-CH TTL digital input/output
    • 2-CH 16-Bit general-purpose timer/counter
    • Analog and digital triggering
    • Fully auto calibration
    • Multiple cards synchronization through SSI (System Synchronization Interface) bus or PXI trigger bus

    Specifications

    Model PXI/DAQ/DAQe-2204 PXI/DAQ/DAQe-2205 PXI/DAQ/DAQe-2206
    Analog Input
    Resolution 12 bit 16 bit
    Number of channels 64 single-ended or 32 differential (software selectable per channel)
    Maximum sampling rate 3 MS/s 500 kS/s 250 kS/s
    Programmable gain 1, 2, 4, 5, 8, 10, 20, 40, 50, 200 1, 2, 4, 8
    Bipolar input ranges Max. : ±10 V, Min. : ±0.05 V±10 V, ±5 V, ±2.5 V, ±1.25 V±10 V, ±5 V, ±2.5 V, ±1.25 V
    Unipolar input ranges Max. : 0-10 V, Min. : 0-0.1 V0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V
    Input Coupling DC
    Overvoltage protection Power on: Continuous ±30 V, Power off: Continuous ±15 V
    Input Impedance 1 GΩ/100 pF
    Trigger sources Software, external digital/analog trigger, SSI bus
    Trigger modes Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
    FIFO buffer size 1 k samples
    Data Transfers Polling, scatter-gather DMA
    Analog Output
    Number of channels 2 voltage outputs
    Resolution 12bit
    Output ranges 0-10 V, ±10 V, 0-AOEXTREF, ±AOEXTREF
    Maximum update rate 1 μs
    Driving capacity ±5 mA
    Trigger sources Software, external digital/analog trigger, SSI bus
    Trigger modes Post-trigger, delay-trigger, and repeated trigger
    FIFO buffer size 1 k samples
    Data transfers Programmed I/O, scatter-gather DMA
    Digital I/O
    Number of channels 24-CH 8255 programmable input/output
    Compatibility 5 V/TTL
    Data transfers Programmed I/O
    Timer/Counter
    Number of channels 2
    Resolution 16bit
    Compatibility 5V/TTL
    Base clock available 40 MHz, external clock up to 10 MHz
    General Specifications
    Auto Calibration Yes (+5 V, ±2 ppm/˚C)
    Dimensions 160 mm x 100 mm (6.24″ x 3.9″) (not including connectors) (PXI-2200 series)
    Connector 68-pin VHDCI female x 2
    Operating temperature 0˚C to 55˚C (32˚F to 131˚F)
    Storage temperature -20˚C to 70˚C (-4˚F to 158˚F)
    Humidity 5 to 95%, non-condensing
    Power requirements +5 V 1.3 A typical (PXI-2204) +5 V 1.2 A typical (PXI-2205) +5 V 1.2 A typical (PXI-2206)

     

    Datasheet