OnRobot Sander
The OnRobot Sander comes with everything you need to get started right away: plug-and-play sanding tool, a variety of standard sanding and polishing discs, easy-to-use software, and optional automated Grit Changer and force torque sensor. What you don’t need is a noisy and expensive air compressor for this economical electric sander.
Use this flexible tool for a wide range of part geometries and materials to get greater consistency, higher finish quality, and lower scrap rate. You’ll reduce workplace dust due to the use of standard 3M clean sandpaper discs and reduce the risk of worker injury from the vibration of manual sanders.
FAST, EASY SETUP AND CHANGES
Out-of-the-box deployment with the ability to quickly program and re-program material removal and finishing tasks.
COMPLETE WITH EVERYTHING NEEDED TO GET STARTED
Complete solution includes sanding tool, standard pads and grits, force/torque sensor and Grit Changer
FLEXIBLE FOR WIDE RANGE OF MATERIALS AND GEOMETRIES
Replaceable standard sanding discs and easy adjustment of tool’s rotation speed ensures high quality surface finishing
NO COMPRESSED AIR REQUIRED
Powerful and durable electric sander does not require compressed air, significantly reducing high running and maintenance costs.
OPTIONAL GRIT CHANGER AVAILABLE
Enables automatic switching between different sanding discs without the need for operator intervention.
FACILITATES COMPLIANCE WITH LOCAL HEALTH AND SAFETY REGULATIONS
Reduces risk of workplace injuries caused by high vibration in hand tools and fine dust
Specifications
| General Properties | Minimum | Typical | Maximum | Unit |
| Pad diameter | – | – | 127[5] | mm [inch] |
| Pad height | – | – | 9.5[0.37] | mm [inch] |
| Orbit size | – | – | 5 [3/16] | mm [inch] |
| Rotation speed – RPM | 1,000 | – | 10,000 | RPM |
| Pad type(3M:20353) | Clean Sanding Disc Pad | |||
| Pad media type | Hookit | |||
| Pad weight | 0.1 [0.22] | kg [lb] | ||
| Weight (with pad) | 1.2 [2.645] | kg [lb] | ||
| IP rating | IP54 | |||
| Dimensions (outer) | 87 x 123 x 214 [3.42 x 4.84 x 8.42] | mm [inch] | ||
| Operating conditions | Minimum | Typical | Maximum | Unit | |
| Sanding power | – | 150 | – | W | |
| Operation voltage
|
External voltage | – | 30 | – | V |
| External power | – | 150 | – | W | |
| Tool connector voltage | – | 24 | – | V | |
| Tool connector power | – | 2.4 | – | W | |
| Operation temperature | 0[32] | – | 50[122] | °C [°F] | |
| Noise level at 10,000 RPM (3,000 RPM) | – | 74(44) | – | [dB] | |