The GDS-3000A series is the flagship product of GW Instek’s new generation digital storage oscilloscope. Its highest frequency bandwidth has been elevated to 650MHz, and the 350MHz model is also available. The memory depth of each channel is up to 200Mpts.
The sampling rate is 5GSa/s interleaved. The display is 10.2″ TFT LCD and the RGB display output is 8 bits each, allowing users to clearly analyze the strength distribution of the measured signal. The models include two-channel and four-channel selections and an optional 16-channel logic analyzer.
GDS-3000A is equipped with a standard dual-channel 25MHz arbitrary waveform generator. Users can select the arbitrary waveform function to store the signal measured by the analog channel or directly output it from the signal generator.
This function allows users to conveniently generate various types of measured signals to simulate diversified signal outputs. The frequency response analysis function (Bode Plot) is also equipped, which can be applied to product circuit and component characteristic verification and analysis, including RLC circuit design, filter design and amplifier design verification and analysis.
Features:
- 650MHz /350MHz Bandwidth, 2 Input Channels
- 5GSa/s Real-time Sampling Rate(half channels); 2.5GSa/s Real-time Sampling Rate(all channels)
- Per Channel 200Mpts Memory Depth
- 200,000 wfm/s of Waveform Update Rate
- 10.2 inch 800*480 TFT LCD Display
- 490,000 Segmented Memory and Waveform Search Functions to Optimize the Efficiency of Record Length
- 38 Automatic Measurement Functions Offers Various Measurement Selections
- High-resolution acquisition mode
- I2C/UART/CAN/LIN Serial bus trigger and decoding functions
- Dual Channel Spectrum analyzer (DC~2.5GHz) with spectrogram
- Dual Channel 25MHz Arbitrary Waveform Generator
- Optional 13 sets power analysis measurement
- Optional 16 digital channel with Logic analyzer(MSO)
Specification
GDS-3352 | Channels | 2 + Ext |
Bandwidth | DC ~ 350MHz (–3dB) @50Ω/1MΩ input impedance | |
Rise Time | 1ns (calculated) | |
Bandwidth Limit | 20MHz/100MHz/200MHz* | |
GDS-3652A | Channels | 2 + Ext |
Bandwidth |
DC ~ 650MHz (–3dB) @50Ω input impedance DC ~ 500MHz (–3dB) @1MΩ input impedance |
|
Rise Time | 535ps (calculated) | |
Bandwidth Limit | 20MHz/100MHz/200MHz/300MHz* | |
Vertical Sensitivity |
Resolution
|
8 bits (Max.12bits with Hi Res) For 1MΩ input impedance: 1mV*~10V/div For 50Ω input impedance: 1mV*~1V/div |
Input Coupling | AC, DC, GND | |
Input Impedance | 1MΩ// 22pF approx. | |
DC Gain Accuracy |
1mV: ±5% full scale ≥2mV: ±3% full scale |
|
Maximum Input Voltage |
1MΩ input impedance: 300Vrms, CAT II 50Ω input impedance: 5Vrms max |
|
Waveform Signal Process
|
+, -, ×, ÷, FFT, User Defined Expression FFT: Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning or Blackman. |
|
Trigger | Source | CH1, CH2, Line, EXT |
Trigger Mode | Auto (supports Roll Mode for 100ms/div and slower), Normal, Single | |
Sensitivity |
DC ~ 100MHz Approx. 100mV 100MHz ~ 350MHz Approx. 150mV |
|
Input Impedance | 1MΩ±3%~22pF | |
Range | ±20V | |
Horizontal | Time base Range | 1ns/div ~ 1000s/div (1-2-5 increments) ROLL: 100ms/div ~ 1000s/div |
Signal Acquisition
|
Time base Accuracy | ±5ppm |
Real Time Sample Rate | 5GSa/s one channel; 2.5GSa/s dual channels |
|
Record Length | Max. 200Mpts /CH | |
AWG | Channels | 02 |
Sample Rate | 200 MSa/s | |
Vertical Resolution | 14 bit | |
Max. Frequency | 25 MHz | |
Output Range | 20 mVpp to 5 Vpp, HighZ; 10 mVpp to 2.5 Vpp, 50Ω |
|
Output Resolution | 1mV | |
Spectrum Analyzer |
Frequency Range | DC~2.5GHz Max |
Resolution Bandwidth | 1Hz ~ 2.5 MHz (max) | |
Display | TFT LCD | 10.2″ TFT LCD WVGA color |
Display Resolution | 800 horizontal × 480 vertical pixels (WVGA) | |
Waveform Update Rate | 200,000 waveforms per second, maximum | |
Interface | Support | USB port, Go-NoGo BNC, RS232, VGA Video Port |
Weight | App 4.6 kg | |
Dimensions | 420mm(W)X 253mm(H)X 113.8mm(D) |
More detail here!