DAQ/DAQe-2204/2205/2206
- Supports a 32-Bit 3.3 V or 5 V PCI bus (DAQ-2200 series)
- x1 lane PCI Express® Interface (DAQe-2200 series)
- 64-CH single-ended or 32-CH differential analog inputs
- Onboard 1 k-sample A/D FIFO
- Bipolar or unipolar analog input ranges
- Programmable gains:
- x1, x2, x4, x5, x8, x10, x20, x40, x50, x200 (DAQ/DAQe-2204)
- x1, x2, x4, x8 (DAQ/DAQe-2205 & DAQ/DAQe-2206)
- 512-configuration channel gain queue
- Scatter-gather DMA for both analog inputs and outputs
- 2-CH 12-Bit multiplying analog outputs with waveform generation
- Onboard 1 k-sample D/A FIFO
- 24-CH TTL digital input/output
- 2-CH 16-Bit general-purpose timer/counter
- Analog and digital triggering
- Fully auto calibration
- Multiple cards synchronization through SSI (System Synchronization Interface) bus or PXI trigger bus
Specifications
| Model | DAQ/DAQe-2204 | DAQ/DAQe-2205 | DAQ/DAQe-2206 |
| Analog Input | |||
| Resolution | 12 bit | 16 bit | |
| Number of channels | 64 single-ended or 32 differential (software selectable per channel) | ||
| Maximum sampling rate | 3 MS/s | 500 kS/s | 250 kS/s |
| Programmable gain | 1, 2, 4, 5, 8, 10, 20, 40, 50, 200 | 1, 2, 4, 8 | |
| Bipolar input ranges | Max. : ±10 V, Min. : ±0.05 V±10 V, ±5 V, ±2.5 V, ±1.25 V±10 V, ±5 V, ±2.5 V, ±1.25 V | ||
| Unipolar input ranges | Max. : 0-10 V, Min. : 0-0.1 V0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V | ||
| Input Coupling | DC | ||
| Overvoltage protection | Power on: Continuous ±30 V, Power off: Continuous ±15 V | ||
| Input Impedance | 1 GΩ/100 pF | ||
| Trigger sources | Software, external digital/analog trigger, SSI bus | ||
| Trigger modes | Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger | ||
| FIFO buffer size | 1 k samples | ||
| Data Transfers | Polling, scatter-gather DMA | ||
| Analog Output | |||
| Number of channels | 2 voltage outputs | ||
| Resolution | 12bit | ||
| Output ranges | 0-10 V, ±10 V, 0-AOEXTREF, ±AOEXTREF | ||
| Maximum update rate | 1 μs | ||
| Driving capacity | ±5 mA | ||
| Trigger sources | Software, external digital/analog trigger, SSI bus | ||
| Trigger modes | Post-trigger, delay-trigger, and repeated trigger | ||
| FIFO buffer size | 1 k samples | ||
| Data transfers | Programmed I/O, scatter-gather DMA | ||
| Digital I/O | |||
| Number of channels | 24-CH 8255 programmable input/output | ||
| Compatibility | 5 V/TTL | ||
| Data transfers | Programmed I/O | ||
| Timer/Counter | |||
| Number of channels | 2 | ||
| Resolution | 16bit | ||
| Compatibility | 5V/TTL | ||
| Base clock available | 40 MHz, external clock up to 10 MHz | ||
| General Specifications | |||
| Auto Calibration | Yes (+5 V, ±2 ppm/˚C) | ||
| Dimensions | 175 mm x 107 mm (6.82″ x 4.17″) (not including connectors) (DAQ-2200 series)
168 mm x 107 mm (6.55″ x 4.17″) (not including connectors) (DAQe-2200 series |
||
| Connector | 68-pin VHDCI female x 2 | ||
| Operating temperature | 0˚C to 55˚C (32˚F to 131˚F) | ||
| Storage temperature | -20˚C to 70˚C (-4˚F to 158˚F) | ||
| Humidity | 5 to 95%, non-condensing | ||
| Power requirements | +5 V 1.3 A typical (DAQ-2204)
+3.3 V 0.9 A, +12 V 0.564 A typical (DAQe-2204) |
+5 V 1.2 A typical (DAQ-2205)
+3.3 V 0.81 A, +12 V 0.568 A typical (DAQe-2205) |
+5 V 1.2 A typical (DAQ-2206)
+3.3 V 0.756 A, +12 V 0.584 A typical (DAQe-2206) |